Lamacoid, aluminum or stainless steel tags: which should you use?

For most labels, use lamacoid. It’s a two-layer engraving plastic: we engrave through the coloured face to show the core underneath, so the lettering is part of the tag, and it comes in colour pairs for coding panels, valves and equipment. Choose stainless steel when the job needs metal or the toughest tag possible. An engraved stainless tag is about as tough as a tag gets. Black anodized aluminum suits a clean metal nameplate. Most customers choose by what the drawing specifies or by the look they want.

Engraved lamacoid control labels in several colours, with circular switch openings

Lamacoid: the everyday choice

Lamacoid is also called engraved plastic, phenolic or Traffolyte. It has a thin coloured face over a contrasting core. We engrave through the face, so the lettering isn’t printed on top and won’t rub off. We use Gravoply and Trotec laminates. We stock lamacoid in 1/32, 1/16 and 1/8 in. The builder offers 1/16 in for standard labels and 1/8 in for exterior use. For 1/32 in, add it to your notes.

Colour pairs (face and lettering): black and white, white and black, yellow and black, red and white, blue and white, green and white, orange and black, brushed silver and black, brushed gold and black. There are more in the lamacoid colour guide. That range is why lamacoid is the usual pick for electrical panels and breakers, valve tags and equipment labels, where colour carries meaning.

Stainless steel: when it has to last

We make stainless tags two ways. Laser marking anneals a dark, permanent mark into the surface. Engraving goes into the metal itself. Choose stainless when the spec calls for metal, or when the tag will live outdoors, get washed down, see heat or take a beating. Stainless tags go up to 12 x 24 in. They can have rounded corners, but not a fully round shape.

Aluminum: a clean metal nameplate

Black anodized aluminum gives a sharp metal look with bright laser-marked lettering, and it’s lighter than stainless. It works well for equipment nameplates and ID plates where you want metal but don’t need stainless. See metal tags and laser marking.

Quick comparison

FeatureLamacoidStainless steelBlack anodized aluminumBrass
LetteringEngraved through the colour faceLaser marked or engravedLaser markedDiamond-drag engraved, black filled
LookMany colour pairsNatural steelBlack with bright letteringNatural brass
Best forPanels, breakers, valves, equipment, doorsOutdoor, harsh or high-wear spots, metal specsEquipment nameplates and ID platesValve tags and equipment
Round shapeYesNoNoBy quote

Brass tags have a natural brass finish and diamond-drag engraving with black-filled lettering. For valve tags and equipment, request a brass tag quote.

Sizes and mounting

Tags start at 12 x 6 mm and go up to 24 x 24 in, with stainless up to 12 x 24 in. Larger sizes are quoted on request. Mounting options are drilled holes, slots, adhesive backing, screw or rivet layouts, and cable-tie holes. Tell us how the tag attaches and we’ll lay out the holes to suit.

Not sure which to pick?

Send the drawing or spec if there is one, and we’ll make what it calls for. If there isn’t one, tell us where the tags go and what they’ll face (sun, heat, chemicals, washdown). You can build tags in the Industrial Label & Tag Builder or import a whole schedule there.

FAQs

What is lamacoid?

A two-layer engraving plastic. We engrave through the coloured face to show the contrasting core, so the lettering is part of the tag. It’s also called engraved plastic, phenolic or Traffolyte.

Which tag lasts the longest?

Engraved stainless steel. It’s the toughest tag we make, which is why it’s chosen for outdoor, harsh and high-wear spots.

Can I get round stainless tags?

No. Round tags are lamacoid only. Stainless and aluminum tags can have rounded corners.

Do you ship tags outside Hamilton?

Yes. We ship across Ontario and Canada, and couriers pick up every business day.

Send us your details

Build a tag or send a schedule

Call us at (905) 388-8679.